HD Stub Axle, Zero Offset, for V3, EVO V2

Overview

Genuine Hobby Plus part: HD Stub Axle, Zero Offset, for V3, EVO V2 (part number HBP240510). Listed by the manufacturer for: Hobby Plus CR18P V3. Check your model's parts list or manual to confirm fit before ordering.

Features

• Utilizes the updated 1.5mm solid axle pin.
• Less slop in drivetrain compared to small pin stub axle.

Special Notes

• Pins not included. See part number #HBP240466
• If upgrading to this axle from our old non stepped axles with smaller pins, you must also get the appropriate hex. See part number #HBP240511

What it Fits

• CR18P V3, CR18P EVO V2.
• Can also be used to update older stub axles that are not stepped when combined with the appropriate hex and 1.5mm pin.
• Can be used to reduce the track width of the Juice Up (optional hexes needed for the Juice Up).
• Can be used on the Arktos or Terranaut to reduce the track width by 2mm per side (Not, always check tire clearances before using on these platforms.
• Specs
• Thread Size: M2.5
• Offset: 0

Specifications

What's in the Box

• Portal Stub Axle shafts x 4