USB Charger, 7.4v, Speck

Overview

Genuine Hobby Plus part: USB Charger, 7.4v, Speck (part number HBP250136). Listed by the manufacturer for: Hobby Plus Speck-B. Check your model's parts list or manual to confirm fit before ordering.

Manufacturer specifications

• JST-XH 2S Balance Plug / USB Charge Plug

Directions

• Charging the Battery

Connect the charger to a USB port then connect the battery to the charger.

When charging, the status LED is red, when charged, the status LED is green.

• Do not let the battery charge unattended!

If the battery or charger is hot, disconnect the battery and charger immediately as this may be caused by an internal short-circult.

• Lithium Polymer (LiPo) Battery Warning

Never charge a lithium polymer battery with a charger designed for Nicd, NIMH, or any other type of battery chemistry. Use ONLY charger designed for LiPo battery.

Do not leave LiPo battery unattended during charging.

Do not overcharge the battery.

Always charge LiPo batteries on non-flammable, heat-resistant surfaces.Always use a LiPo-safe bag or container while charging. Do not allow LiPo cells to overheat at any time. Cells which reach greater than 140 Fahrenheit(60°C) will usually become damaged and will catch fire.

Do not charge the LiPo pack while it is still in the model. Never charge or store battery packs in a vehicle.

Do not discharge LiPo: doing so will damage the battery.

• Do not expose LiPo cell to water or moisture at any time

Do not store battery near open flame or heater.

Do not assemble LiPo cells or pre-assembled packs together with other LiPo cells or packs.

Always store LiPo battery in a secure location away from children.

Always remove the LiPo battery if model is involved in any kind of crash.

Carefully inspect the battery and connectors for even the smallest damage.

CAUTION: Cells may become hot after usage. Allow the pack to cool to room temperature prior to recharging.

Do not allow the electrolyte to get into eyes or on skin. Wash affected areas immediately if they come into contact with electrolyte. Do not alter or modify connectors or wires of a LiPo battery pack.

Always inspect the condition of the battery before charging and operating.

Do not short circuit the LiPo battery.

Do not have contact with a leaky/damaged battery directly.

Do not charge battery out of recommended temperature range (0°C-45°C)

Specifications

What's in the Box

• USB Charger x 1